ASIAB Industrial Group

Screw conveyor is a machine used to move bulk materials from one location to another. It consists of a rotating shaft with a spiral blade that moves the material along the length of the conveyor. They can be horizontal, inclined, or vertical, depending on the specific needs of the application.

Chain conveyor uses a chain to transport materials, such as powders, granules, or bulky items, from one location to another. It consists of a series of linked chains that are connected to a drive mechanism, which pulls the chains through a trough or tube, moving the material along the length of the conveyor.

Bucket elevator is a device used to lift and convey materials vertically upwards within a tower. It consists of a series of buckets attached to a belt that rotate around a central axis, lifting the material from the bottom to the top of the elevator.

Pneumatic conveyor is a system that uses compressed air to move materials, such as powders through a pipe or tube. The material is moved by the flow of air, which is generated by a blower or compressor. They offer several advantages, including gentle handling of materials, low maintenance, and flexibility.

Modular silos are prefabricated components used to construct silos for storing bulk materials such as grains, cereals, and other dry products. These panels are designed to be easily assembled and disassembled, allowing for quick construction and modification of silo structures.

Modular silos are prefabricated components used to construct silos for storing bulk materials such as grains, cereals, and other dry products. These panels are designed to be easily assembled and disassembled, allowing for quick construction and modification of silo structures.

Machine bin is used to store and dispense materials. It is essentially a container with an opening at the bottom through which the material flows out, either manually or through the use of machinery like feeders and gates.

Bag filter is a type of air filtration system that uses a fabric bag or sleeve to capture particles and contaminants from the air. The bag filter is designed to fit over a vent or duct, and as air passes through the filter, the particles are collected on the surface of the bag.

Sieving machine, also known as a screening machine, is a device used to separate particles or objects of different sizes. The basic mechanism of a sieving machine involves a screen or mesh that vibrates or rotates, allowing particles to pass through the holes in the screen while separating them into different size fractions.

Micro dosing machine is a device that accurately dispenses very small quantities of material, typically in the range of milligrams to microliters. These machines are commonly used in various fields such as dispensing tiny amounts of drugs.

Weighing system is a set of equipment and instruments used to measure the weight of objects or substances. There are various types of weighing systems available, ranging from simple balance scales to advanced electronic weighing devices.

Premix mini weighing system is a small-scale weighing system designed for precise measurement of small quantities of materials, such as powders, granules. It is commonly used in various industries where precise measurement is critical.

Liquid weighing system is a type of weighing system that is specifically designed to measure the weight of liquids. The system typically consists of a tank or container that holds the liquid, a load cell or scale that measures the weight, and a control system that monitors and records the weight.

Hammer mill is a type of crusher that uses rotating hammers to break up material into smaller pieces. The hammer mill works by feeding material into the machine, where it is struck by rotating hammers, breaking it down into smaller particles. The resulting particles are then expelled from the machine, often through a screen or grate, to separate them by size.

Hammer Mill Plus that is characterized by its high capacity and fine throughputs, is a type of crusher that uses rotating hammers to break up material into smaller pieces. The hammer mill works by feeding material into the machine, where it is struck by rotating hammers, breaking it down into smaller particles. The resulting particles are then expelled from the machine, often through a screen, to separate them by size.

Turbo mixer is designed to provide efficient and uniform mixing of materials. A turbo mixer consists of a cylindrical vessel, a rotor, and a stator. The rotor is typically made up of a series of paddles or blades attached to a central shaft, which is driven by a motor.

Rotary batch mixer is based on the concept of tumble mixing. The drum rotates around its vertical axis, causing the material inside the drum to tumble and move freely. As the material moves through the drum, it comes into contact with the agitators, which break up any clumps and distribute the material evenly throughout the drum.

Ribbon mixer is a type of mixer that uses a spiral-shaped agitator, known as a ribbon, to mix materials. The ribbon mixer consists of a horizontal cylinder with a longitudinal axis, and a rotating shaft with a spiral-shaped blade or ribbon that runs along the length of the cylinder.

Mini paddle mixer is a great option for mixing small quantities of premixes. These mixers are designed to provide efficient and uniform mixing of a variety of materials, including powders, granules.

Super hygienic processor machines can condition materials by adding steam, water, or other liquids to create a uniform mixture that is easier to pelletize and is similar to a conditioner which is an essential component in modern animal feed manufacturing facilities, providing numerous benefits.

A feeder conditioner is a piece of equipment used to process and condition materials before they are fed into a larger machine or system. The purpose of a feeder conditioner is to prepare the material for further processing before they are pelletized or extruded into animal feed.

Pellet mill is a type of machinery used to convert materials into pellets. Pellets are small, dense, and uniform pieces of material that can be easily stored, transported, and used as fuel or feedstock in various industries.Pellet mills can efficiently convert large quantities of material into compact, energy-dense pellets.

Crumbler is a device used to break up pellets into smaller pieces, typically for use in animal feed or fertilizer production. Pellet crumblers are designed to reduce the size of pellets while minimizing the generation of fines and dust.

Counterflow cooler is a type of heat exchanger used in the animal feed industry to cool down the temperature of feed pellets after they have been extruded or expanded. The cooler uses a counterflow principle, where the hot feed pellets are cooled by a stream of cold air that flows in the opposite direction.

Mash cooler is a piece of equipment used in the production of animal feed to cool down the temperature of the mash, which is a mixture of grains, proteins, and other nutrients that have been ground into a pulpy consistency. The mash cooler is an essential part of the feed manufacturing process, as it helps to prevent spoilage and improve the quality of the final product.

Fertilizer cooler is a type of cooling system used in the production of fertilizers. It is designed to cool the fertilizer material after it has been granulated or pelletized, in order to prevent overheating and damage to the product.

Fat coater is a machine used to apply a layer of fat or oil to a surface, such as animal feed. The purpose of a fat coater is to add flavor, moisture, and texture to the product, as well as to enhance its appearance and extend its shelf life.

Flake mill is a type of machinery used in various industries to produce flakes or flat sheets from various materials. The basic operation of a flaker mill involves feeding the material into the machine, where it is first crushed or broken up by a series of rollers then passed through a set of flaking rollers, which press and flatten the material into thin flakes or sheets.

Flake steam tower is a type of heat exchanger used in various industrial processes to cool hot fluids. It consists of a vertical column filled with a bed of flaky material that is designed to increase the surface area available for heat transfer.Hot fluid or gas enters the bottom of the tower and rises through the bed of flakes, while cooler fluid or gas enters the top of the tower and flows downward through the flakes.

Full automatic bagging machine is a type of packaging machinery that automates the process of filling and sealing bags with various materials. Unlike traditional bagging machines that require the operator to manually open and close the bag mouth, an open mouth full automatic bagging machine features a continuously open mouth that allows the machine to automatically weigh, feed, fill, and seal bags without any human intervention.

Semi-automatic bagging machine is a type of packaging equipment that automates the process of filling and sealing bags with various materials. However, unlike fully automatic machines, semi-automatic bagging machines typically require some level of human interaction to operate.

Valve bagging machine is a type of packaging machinery used to automatically fill, weigh, and bag granular or powdered materials. These machines are designed to handle products that are difficult to meter accurately using traditional volumetric measuring techniques.